FLACS-Risk is a new, unique software solution for 3D CFD risk modelling and visualisation. The tool allows risk-owners to design facilities that are significantly more cost effective, while still maintaining the required high safety levels.
Illustration shows example of FLACS-Risk output: new 3D risk visualization of 1e-4/yr explosion overpressures
Key Benefits of FLACS-Risk
- 3D visualisation of risk to efficiently communicate and improve risk-owners understanding of safety issues
- Reduce the cost of design, engineering and construction
- More efficient workflows reduce man-hours and lead-time of running simulations by more than 25 per cent
- Will standardise methodology for safety studies
The FLACS software gives accurate answers about explosion overpressures, toxic gas concentrations and heat loads, which is critical input when designing facilities with explosion, toxic and fire hazards. The benefit of FLACS-Risk is clear 3D visualisation of risk calculation data, which can be communicated to risk-owners more efficiently than ever before.
Improved Understanding of Safety Issues
Traditionally, the task of calculating the extent of risk in hazardous environments has been reserved for a few, high-end safety consultancies. The challenge has also been that such studies take long to conduct.
The unique quality of FLACS-Risk is that you can show the full 3D risk picture. By identifying structural hotspots, the risk-owners can design structures with reinforcements in areas of high forces and not uniformly reinforce for the highest force anywhere.
FLACS-Risk will have integrated quality assurance functions and give less room for error. Consistency in output between different users will improve, with far less time spent in the project.
The four plots in the video shows the following: Top left: Explosion DRAG forces projected on surfaces with 1e-4/yr frequency (1x per 10000 years) [Range 0-0.5 bar] Top right: Explosion DRAG forces as 3D volume with 1e-4/yr frequency (1x per 10000 years) [Range 0.3-0.5 bar] Bottom Left: Explosion Overpressure forces projected on surfaces with 1e-4/yr frequency (1x per 10000 years) [Range 0-1.0 bar]
An important part of FLACS-Risk is the ability to run and manage many simulations efficiently. Originally FLACS was developed to run a hand-full of simulations, while for risk studies you need to run hundreds or thousands of simulations.
FLACS-Risk Simulation Capabilities:
- Well organised
- Big volume
- Inexpensive to run: Computer hours are cheap, it is additional man-hours that cost money
- Simulations run quickly
The first commercial version of FLACS-Risk will have some limitations, most importantly no explosions. However, many risk-owners will benefit greatly from a 3D FLACS risk tool that provides valuable output from risk studies on dispersion and jet fires.
Features of FLACS-Risk version 1.0:
- Dispersion and fire modelling
- Steady state and transient modelling
- UKOAA ignition model
The launch of FLACS-Risk complements our existing software portfolio. We believe that companies can achieve significant cost and time saving by standardising on a single software tool that resolves both consequence and risk simulations.
FLACS-Risk Launches in 2017
The FLACS-Risk module will be available early 2017. We are not ready to give a definitive release date just yet, but contact us to stay updated about FLACS-Risk.
Get in touch on FLACS@gexcon.com for further information about FLACS-Risk.