2014

  • Azzi, C. (2014). The benefit of using CFD software to improve fire safety and detection in the offshore industry. International Fire Buyer, 26 (3): 52-53.
  • Bernard, L, de la Rosa, D, Pugh, D., Crayford, A. & Bowen, P.J. (2014). Investigation of the laminar burning velocity for ethanol and hexane vapour. Proceedings Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014: 247-258. ISBN: 978-82-999683-0-0 (PDF).
  • Davis, S.G. & Hinze, P. (2014). Dust explosions: Case studies of dryer explosions and a need for advanced vent design. Proceedings Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014: 1173-1195. ISBN: 978-82-999683-0-0 (PDF).
  • Davis, S.G. & Hinze, P. (2014). Simulating explosive pressure in test geometries with FLACS-Blast. Proceedings Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014: 433-458. ISBN: 978-82-999683-0-0 (PDF).
  • Davis, S.G. & Marsegan, C. (2014). Initial investigative facts in the West Fertilizer explosion. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 411-432. ISBN: 978-0-9851357-5-1.
  • Engel, D. & Davis, S.G. (2014). Challenges for explosion risk management in arctic environments. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 752-763. ISBN: 978-0-9851357-5-1.
  • Engel, D., Davis, S.G. & van Wingerden, K. (2014). Complex explosion development in mines: Case study – 2010 Upper Big Branch mine explosion. Proceedings Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014: 1007-1036. ISBN: 978-82-999683-0-0 (PDF).
  • Gant, S.E., Narasimhamurthy, V.D., Skjold, T., Jamois, D. & Proust, C. (2014). Evaluation of multi-phase atmospheric dispersion models for application to carbon capture and storage. Journal of Loss Prevention in the Process Industries, 32: 286-298. DOI
  • Gavelli, F. (2014). CFD-based QRA of an LNG liquefaction facility. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 968-979. ISBN: 978-0-9851357-5-1.
  • Li, J., Abdel-jawad, M. & Ma, G. (2014). New correlation for vapor cloud explosion overpressure calculation at congested configurations. Journal of Loss Prevention in the Process Industries, 31: 16-25. DOI
  • Ma, G., Li, J. & Abdel-jawad, M. (2014). Accuracy improvements in the evaluation of gas explosion overpressures in congestions with safety gaps. Journal of Loss Prevention in the Process Industries, 32: 358-366. DOI
  • Nilsen, S., Høiset, S. & Salaun, N. (2014). Improving safety risk tools for accidental fluid releases with high H2S concentrations. Abu Dhabi International Petroleum Exhibition & Conference (ADIPEC), 10-13 November 2014, SPE 14ADIP-P-853-SPE, Society of Petroleum Engineers (SPE): 17 pp.
  • Pedersen, H.H., Enstad, G.A., van Wingerden, M., Olsen, K.L., Kalvatn, I.B., Sømoe, K., Wilkins, B., Middha P. & van Wingerden, K. (2014). Investigation of concentration effects on the flame acceleration in vented channels. Proceedings Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014: 505-520. ISBN: 978-82-999683-0-0 (PDF).
  • Rosas, C., Davis, S., Engel, D., Middha, P., van Wingerden, K. & Mannan, S. (2014). Deflagration to detonation transitions (DDTs): Predicting DDTs in hydrocarbon explosions. Journal of Loss Prevention in the Process Industries, 30: 263-274. DOI
  • Samaraweera, R. (2014). CFD for oil and gas pipe networks – reducing the risk to life, property and assets. Scandinavian Oil-Gas Magazine, 42: 26, 28 (2 pp.).
  • Skjold, T. (2014). Simulating vented maize starch explosions in a 236 m3 silo. Eleventh International Symposium on Fire Safety Science, University of Canterbury, New Zealand, 10-14 February 2014, International Association for Fire Safety Science (IAFSS): 12 pp.
  • Skjold, T., Castellanos, D., Olsen, K.L. & Eckhoff, R.K. (2014). Experimental and numerical investigations of constant volume dust and gas explosions in a 3.6-m flame acceleration tube. Journal of Loss Prevention in the Process Industries, 30: 164-176. ISSN: 0950-4230. DOI
  • Skjold, T., Eckhoff, R.K. & van Wingerden, K. (2014). Proceedings of the Tenth International Symposium on Hazards, Prevention, and Mitigation of Industrial Explosions (X ISHPMIE), Bergen, 10-14 June 2014, Edited by Trygve Skjold, Rolf K. Eckhoff & Kees van Wingerden: 1726 pp. ISBN: 978-82-999683-0-0.
  • Skjold, T., Pedersen, H.H., Narasimhamurthy, V.D., Lakshmipathy, S., Pesch, L., Atanga, G.F., Folusiak, M., Bernard, L., Siccama, D. & Storvik, I.E. (2014). Pragmatic modelling of industrial explosions in complex geometries: review of the state-of-the-art and prospects for the future. Zel’dovich Memorial: Accomplishments in the combustion Science in the last decade, Volume 1: 70-74. Edited by A.A. Borisov & S.M. Frolov. ISBN 978-5-94588-156-3. Torus Press, Moscow.
  • van Wingerden, K. (2014). A devastating metal dust explosion in a crushing plant. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 882-894. ISBN: 978-0-9851357-5-1.
  • van Wingerden, K. (2014). Anforderungen an Schutzsysteme / Requirements for protective systems. Sichere Handhabung brennbarer Stäube, Nürnberg 21-22 October 2014, VDI-Berichte 2225:155-164. VDI Verlag, Düsseldorf, ISSN 0083-5560, ISBN 978-3-18-092225-6.
  • van Wingerden, K., Bratteteig, A. & Davis, S.G. (2014). The effect of ignition modelling on prediction of explosion risk. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 264-273. ISBN: 978-0-9851357-5-1.
  • van Wingerden, K. & Davis, S.G. (2014). Scaling of metal dust explosions. 2014 Mary Kay O’Connor Process Safety Center International Symposium, College Station, Texas, 28-30 October 2014: 1008-1016. ISBN: 978-0-9851357-5-1.
  • van Wingerden, K. & Davis, S.G. (2014). Unknown aspects of metal dust explosions. Tenth Global Congress on Process Safety (GCPS), American Institute of Chemical Engineers (AIChE), New Orleans, 30 March – 2 April 2014: 10 pp.
  • Woolley, R.M., Fairweather, M., Wareing, C.J., Falle, S.A.E.G., Mahgerefteh, H., Martynov, S., Brown, S., Narasimhamurthy, V.D., Storvik, I.E., Sælen, L., Skjold, T., Economou, I.G., Tsangaris, D.M., Boulougouris, G.C., Diamantonis, N., Cusco, L., Wardman, .M., Gant, S.E., Wilday, J.,  Zhang, Y.C., Chen, S., Proust, C., Hebrard, J. & Jamois, D. (2014). CO2PipeHaz: Quantitative hazard assessment for next generation CO2 pipelines. Energy Procedia, 63: 2510–2529. Special issue, Twelfth International Conference on Greenhouse Gas Control Technologies (GHGT-12). ISSN: ISSN: 1876-6102. DOI
  • Woolley, R.M., Fairweather, M., Wareing, C.J., Proust, C., Hebrard, J., Jamois, D., Narasimhamurthy, V.D., Storvik, I.E., Skjold, T., Falle, S.A.E.G., Brown, S., Mahgerefteh, H., Martynov, S., Gant, S.E., Tsangaris, D.M., Economou, I.G., Boulougouris G.C. &  Diamantonis, N.I. (2014). An Integrated, multi-scale modelling approach for the simulation of multiphase dispersion from accidental CO2 pipeline releases in realistic terrain. International Journal of Greenhouse Gas Control, 27: 221-238. ISSN: 1750-5836. DOI

Recent News

FLACS-CFD 20 coming soon

FLACS-CFD 20 coming soon

Gexcon is set to launch a major update to its flagship consequence modelling software later this year to offer users greater flexibility, digitalisation and integration capabilities. FLACS-CFD 20 will replace FLACS 10.9 from this autumn and represents a significant software upgrade, building on more than 40 years of industrial safety

News Software
Calling for Beta Testers of Shell FRED 2020

Calling for Beta Testers of Shell FRED 2020

Gexcon and Shell are excited to announce that we are working on a new version of Shell FRED for 2020. Shell FRED allows safety professionals to predict the consequences of Fire, Release, Explosion, and Dispersion from accidental and design releases of products from the process, storage, transport, and distribution operations.

News Software
Gexcon to open new branch office in Sweden

Gexcon to open new branch office in Sweden

Gexcon is happy to announce that we will open a new branch office in Sweden. As our market continues to expand in Sweden, Denmark, and Finland, we realized the need for an additional office closer to our customers.  The Sweden office will provide all the core complex risk and safety

News

E-Newsletter sign-up

Gexcon Makes The World a Safer Place