New Paper shows CAM Model in Shell FRED performs well in predicting DDT

New Paper shows CAM Model in Shell FRED performs well in predicting DDT
Shell FRED

The Shell FRED (Fire, Release, Explosion, and Dispersion) tool is a well-validated software tool for the prediction of the hazardous effects of accidental or intentional releases and is supported by over 40 years of physical testing and validation.

A paper released in the July 2020 edition of the Journal of Loss Prevention in the Process Industries “Comparison of explosion models for detonation onset estimation in large-scale unconfined vapor clouds” compares six different empirical explosion models on their ability to predict DDT (Deflagration to Detonation Transition). In this study, model predictions were compared against large-scale experiments conducted jointly by SRI International and Gexcon. 

Out of the models that were compared, the CAM (Congestion Assessment Method) model, which can be found in the Shell FRED software tool, was shown to have the best performance in predicting the onset of DDT in the test conditions.

The abstract is presented below:

Although industrial detonations in semi-open and congested geometries are often neglected by many practitioners during risk assessment, recent studies have shown that industrial detonations might be more common than previously believed. Therefore, from the explosion safety perspective, it becomes imperative to better assess industrial detonation hazards to improve the robustness of explosion mitigation design, emergency response procedures, and building siting evaluation. Having that in mind, this study aims to review current empirical vapor cloud explosion models, understand their limitations, and assess their capability to indicate detonation onset for elongated vapor clouds. Six models were evaluated in total: TNO Multi-Energy, Baker-Strehlow-Tang (BST), Congestion Assessment Method (CAM), Quest Model for Estimation of Flame Speed (QMEFS), Primary Explosion Site (PES), and Confinement Specific Correlation (CSC). Model estimations were compared with large-scale test data available in the open literature. The CAM model demonstrated good performance in indicating deflagration-to-detonation transition (DDT) for test conditions experiencing detonation onset without any modification in the methodology. Some suggestions are provided to improve simulation results from PES, BST, and QMEFS.”

The full paper can be found here: https://www.sciencedirect.com/science/article/abs/pii/S0950423020301364

DDT is an area of ongoing research for Gexcon and Shell, so you can expect to see further publications on this topic in the coming months.

If you have any queries about Shell FRED or the validation of the supporting models, please contact FRED@Gexcon.com or fill in the enquiry form below.

Learn more about our software here:

Product Enquiry Form

If you need more information or booking arrangement for consultation, please complete the form below and a member of the team will be in touch with you as soon as possible.

Other Uncategorized

Gexcon Announces New CEO

Gexcon Announces New CEO

Gexcon is pleased to announce that our Board of Directors has appointed Trygve Birkeli as our new corporate Chief Executive Officer. Trygve has extensive international experience with a track record of leading high-performing teams. Before joining Gexcon in 2018 as an Executive Vice President, he successfully held multiple senior positions

Event Uncategorized
Longship Fund II Acquires Gexcon AS

Longship Fund II Acquires Gexcon AS

Longship Fund II (“Longship”) has as of February 19th, 2021 acquired 100% of the shares in Gexcon AS from NORCE Norwegian Research Centre AS (“NORCE”).  Gexcon is a global leader in process safety software, safety consulting and testing services, and specializes in analysis of dispersion, explosion and fire related risk and consequences. Based on experience developed in cooperation

Event Uncategorized
Join the hydrogen safety challenges discussion with industry experts

Join the hydrogen safety challenges discussion with industry experts

We are pleased to invite you to join industry experts from Gexcon, Shell, Engie and Wales & West Utilities for an exclusive panel debate where they will be discussing topics surrounding Hydrogen Safety Challenges for the Energy Transition. The main discussion points at this panel debate are as follows: Perceptions within the hydrogen industry around safety

Event Uncategorized Renewables

E-Newsletter sign-up

Gexcon Makes The World a Safer Place