Case Studies

This paper presents the results of our investigation into the cause and origin of the West Fertilizer explosion.

Due to hydrogen’s flammability properties, the Swedish Rescue Services requires ESS (European Spallation Source) to assess the extent of a potential accidental hydrogen release inside the accelerator tunnel.

This case study highlights the importance of correct terrain modelling when assessing risk related to a Liquid Biogas (LBG) plant in a hilly area.

A leading UK car manufacturer required assistance with DSEAR compliance during the design and construction phase of a large engine testing facility. By conducting a range of ventilation and dispersion modelling studies using our in-house computational fluid dynamics software tool, FLACS, Gexcon were able to determine whether a Zone 2 of Negligible Extent could be assigned within a test cell…

Gexcon were initially instructed to provide support with the clients DSEAR compliance requirements during the final phase of development and installation of a new LNG storage facility.  However, following issues with their COMAH submission it was clear that further assistance would be required. A range of process safety services including CFD modelling, were applied to review the facility design by…

DSEAR Compliance for the handling of flammable liquids.

Prove the basis of safety needed to produce hand sanitiser that contains a significant proportion of (highly flammable) alcohol that will show compliance with DSEAR.

The quantity and positioning of hydrocarbon and toxic gas detectors is a crucial factor for the effectiveness of the detection process.

The total number and placement of detectors should be optimized for maximum effectiveness.